SCENEdots

1- Sheet consists of 56 dots @ $12.00 per sheet.

Colors available: Red, White, Blue, Yellow, Orange and Black.

Each dot fits easily onto the smooth surface area between the diamonds.

You can create a stripe in any desired width by simply adding more dots of the same color. A 4" wide stripe is achieved by placing 4 dots side by side. A 6" wide stripe can be achieved by placing 6 dots side by side.

NOTE: Each dot must be installed individually due to the uneven surface of diamond tread plate. The advantage of this application is that the installer can create any striping or numbering configuration.

HOW TO DETERMINE REQUIRED NUMBER OF SHEETS

Measure the width and height of the area that you wish to cover with the SCENEdots and multiply these two numbers. Divide this number by 144 to convert to square feet.

*It requires 2 1/2 sheets per square foot for tread plate.

Example:
72" wide x 40" high = 2,880 divided by 144 = 20 square feet
20sq/ft x 2 1/2(sheets) = 50 sheets will be required
If you are applying two different colors, divide the 50 by 2 to get the correct number of each color required.
In this example you will order 25 red and 25 yellow.

*It requires 3 1/2 sheets per square foot for smooth surface area.

Note: When ordering for smooth surface areas, please let us know so the application tape can be applied to each sheet. This will allow you to installl all 56 dots at one time creating a stripe 4" wide X 12" long. You must add $1.00 per sheet for this application.

9" TALL NUMBERS:
7 dots high (vertical) will equal to a 9" tall number. It is recommended to go two dots wide to make the number bold enough to be seen during the day. A four digit MABAS number will require 3 sheets.

11" TALL NUMBERS:
9 dots high (vertical) will equal to a 11" tall number. It is recommended to go two dots wide to make the number bold enough to be seen during the day. A four digit MABAS number will require 4 sheets.

To order, contact us today!